• Screw Caps
  • KORKED™ SPIN- Low Permeability
  • KORKED™ Spin Medium Permeability
  • KORKED™ Spin+ High Permeability
  • KORKED™ Classic
  • KORKED™ Spark
  • Video Assistance
  • Service Manual
Screw Caps The centuries-old experience with corks evidence that the evolution of the wine in the bottle is strongly linked to the oxygen permeability of the closure. The evident advantages of the micro - oxygenation obtained with cork stoppers are opposed to inconstancy of permeability, related to the variability of the density of the cork, and then of evolution of the wine and odour of cap. This prompted the consumer to opt for alternative closures such as synthetic stoppers and more recently the screw caps.
The main characteristics of screw caps can be summarized as follows:
  • High barrier to oxygen
  • Consistency of performance, reliability
  • Unstoppering without corkscrew
  • Easy to re-close the bottle





Excessive tightness of screw caps, however, does not allow to refine the wines more full-bodied and structured as well as being often due to obvious notes of reduction.
KORKED™ SPIN+ (plus), KORKED™ SPIN e KORKED™ SPIN- (minus) are the innovative patented screw closures that combine all the benefits of screw caps to the natural permeability of corks. A membrane with controlled permeability interposed between the metal capsule and the inside of the bottle allows the micro-oxygen exchange.
KORKED SPIN™ is not a simple closure, but a highly technological that the winemaker can use to fine tune or keep the wine in the bottle. .
With the closures KORKED™ SPIN+ (plus), KORKED™ SPIN and KORKED™ SPIN-(minus) there are more limitations bottling with the screw cap!
The gamma of screw caps KORKED™ consists of:

KORKED SPIN- Low Permeability
KORKED™ SPIN- (minus) low permeability
To be used with wines that, considering their structure, absorption of oxygen and shelf life requirements, do not need a particular oxygen adding. This closure guarantees the protection from oxidation phenomenon and prevent any reduction problems. Assure a perfect maintenance even after long periods of time. KORKED™ SPIN –(minus) screw caps, without incurring in famous TCA problems, replicated the permeability of monopiece high density cork (200 kg/m3).



KORKED SPIN Medium Permeability
KORKED™ SPIN medium permeability
For refinement’s wines: medium permeability. To use on wines that, after a certain period of proper refinement into the bottle reach their tasting top degree. It assure a moderate refinement over time. KORKED™ SPIN screw caps, without incurring in famous TCA problems, replicated the permeability of monopiece medium density cork (160 kg/m3).




KORKED SPIN+ High Permeability
KORKED™ SPIN+ (plus) high permeability
For refinement’s wines: high permeability. To use on structured wines that without an suitable refinement in bottles don’t show your better qualities. It allows to more structured wines to follow their natural refinement process, which is a necessary stage to go through before their consumption. KORKED™ SPIN – (minus) screw caps, without incurring in famous TCA problems, replicated the permeability of monopiece low density cork (130 kg/m3).



KORKED Classic
KORKED™ Classic
If specifically required KORKED™ may supply also screw caps with the most common liners available on market (as SARAN or TIN FOIL) usually employed for table wines.







KORKED Spark
KORKED™ Spark
Designed specifically for sparkling wines (up to 2,5 bar).
Thanks to particular geometry of the liner used, the internal pressure and the quantity of CO2 remain constants even for long periods of time.
KORKED™ SPIN- (minus) Low Permeability
For refinement’s wines
For refinement’s wines: closure with low permeability. To be used with wines that, considering their structure, absorption of oxygen and shelf life requirements, do not need a particular oxygen adding. This closure guarantees the protection from oxidation phenomenons and prevent any reduction problems. Assure a perfect maintenance even after long periods of time.
KORKED™ SPIN– (minus) screw caps, without incurring in famous TCA problems, replicated the permeability of monopiece high density cork (200 kg/m3).
KORKED SPIN- Bassa Permeabilità











Available Colors

colors of Scew Cap
KORKED™ SPIN Medium Permeability
For refinement’s wines
For refinement’s wines: closure with medium permeability. To use on wines that, after a certain period of proper refinement into the bottle reach their top tasting degree. It assures a moderate refinement over time.
KORKED™ SPIN screw caps, without incurring in famous TCA problems, replicated the permeability of monopiece medium density cork (160 kg/m3).
KORKED SPIN Medum Permeability











Available Colors

Screw Cap colors
KORKED™ SPIN+ (plus) High Permeability
For refinement’s wines
For refinement’s wines: closure with high permeability. To use on structured wines that without a suitable refinement in bottles can’t show their better qualities. It allows to more structured wines to follow their natural refinement process, which is a necessary phase to go through before their consumption.
KORKED™ SPIN – (minus) screw caps, without incurring in famous TCA problems, replicated the permeability of monopiece low density cork (130 kg/m3).
KORKED SPIN+ High Permeability











Available Colors

Range of colors for for Screw Caps
KORKED™ CLASSIC
For Still Wines
If specifically required KORKED™ may supply also screw caps with the most common liners available on market (as SARAN or TIN FOIL) usually employed for table wines.
KORKED Classic











Available Colors

Range of Colors
KORKED™ SPARK
Designed specifically for sparkling wines (up to 2,5 bar)
Thanks to particular geometry of the liner used, the internal pressure and the quantity of CO2 remain constants even for long periods of time.
KORKED Spark











Available Colors

Range of Colors for Srew Caps
Video Support for problems related to calibration of bottling head

Video 1 of 4 - Problems and solutions related to the top redraw

Video 2 of 4 - Problems and solutions related to the thread

Video 3 of 4 - Problems and solutions related to beading under truck

Video 4 of 4 - Problems and solutions related to the strength of the opening force

SERVICE MANUAL

You can download the manual for the correct adjustment of the blottling head for screw caps clicking on the following link:

Service Manual (PDF)

Notice

This site uses cookies to collect anonymous statistical data of the use of this site.